A short post on powering your Garmin 1000 from the dynamo while riding. Often, the micro-USB power cable works loose losing power. Here’s my solution.
The first step is to get a right angle micro USB cable like this:http://www.ebay.com.au/itm/321370444583
Then use the rubber ‘bands’ that come with your Garmin and loop one of them around the GPS and the flat side of the micro-usb cable. I have one of those silicon covers for my Edge 1000 which serves to hold the cable in place. If it slips put a bit of tape on the top side.
This arrangement makes the cable really firm in place and yet easy to remove when you want to pop your Garmin off to go shopping.
Postscript: Worked great for a few rides but I’ve done one modification. I used a file to put a groove into the back of the plug which serves to hold the rubber band in place firmly.
The Magnic bicycle light (www.magniclight.com) is an amazing contactless dynamo light. It generates light through its proximity to a moving wheel. I supported it through the inventor’s Kickstarter campaign, and as part of this received a pair of front lights and a rear light suitable for my road bike. I was particularly attracted to the fact that with the Magnic one does not need to have a wheel built around a dynamo hub, or by being contactless it avoids the noise issue with rim dynamos. What follows is my assessment of the Magnic light, in particular its suitability for long-distance endurance riding.
During this year’s Transcontinental Race I was chased by countless packs of dogs and was very traumatized by it all. There is nothing worse than having food poisoning, being exhausted from cycling 24+ h, and trying to dodge dogs. I fantasized about what to do with them but some of my more effective solutions—like taking my rifle with me—are not feasible. Let along legal. So I’ve decided to try a very, very loud horn—at around biting level.
Readers of this blog will know that I consider the Luxos U to be the ultimate dynamo light – at least for road bikes. I have two of them and have relegated my Supernova E3 to my seldom ridden bike. Brilliant light and an integrated USB connection which powers my GPS and other kit. What more does one want? A better bike mount. I did an earlier post on one solution, but I now have two others …
My 2015 ‘A’ race was the Transcontinental Race (TCR) which went from Belgium to Turkey. It took me 16:10:17 to cover the 4,214 km (with 31,515 m of climbing) for 54th place out of the 156 starters (only 76 of us finished).
The key rules of the race are simple:
- It is self supported which means it is just you and your bike with nobody else to help. If something goes wrong, you deal with it. You can’t get/give help to other riders, and only commercial services available to all riders (e.g. bike shops) can be used.
- You must visit four check points on the way to Istanbul. Between these points, you select your own route—which you must navigate on your own.
These races are very challenging not only physically but more so mentally. One plumbs the depths of exhaustion beyond what is imaginable and trying to average 275 km/day and 2,000 m of climbing each day (my target) puts huge demands on the body—hence over half of us not finishing!
Like all bikepacking races it had many highs and a few lows, and overall was a fantastic race which I would highly recommend. Rather than a ‘blow by blow’ account of the experience, I’m going to share some special (and not so special) aspects of the race.
Last year in the Transcontinental Race four of the 78 starters were taken out by cars during the race. A somewhat high attrition rate to say the least … While one cannot control what hits you, one thing you can do is carry appropriate ID so that people are notified of an accident. For many years I’ve used a RoadID ‘dog tag’ with my name and the World Bank’s emergency contact details on it (they have a 24 h manned emergency line), but there is a new system out there called ICEdot which is a marked improvement which I’m now using.
There are two products offered by ICEDot:
- A wrist band Emergency ID and helmet stickers. These contain a code which when an SMS is sent to a number on the band/stickers returns some key data via SMS. You set up a profile on the web which lists the key data that you want sent in response to an SMS being received. Below is what I’ve put in: I’m an asthmatic and they should contact my wife Lis.
- A crash sensor which is affixed to your helmet (my POC is specifically designed for it). In the event of critical forces, the sensor triggers the app over low-energy Bluetooth to sound an alarm and initiate an emergency countdown. Unless the countdown clock is stopped, the app will then notify your emergency contacts and send GPS coordinates of the incident so that appropriate follow up actions can be taken. The sensor recharges via a USB cable and has about 20 h of life before it needs another recharge.
I’m really happy with the wrist band – it’s quite comfortable to wear – and my wife is especially happy with this extra layer of ‘protection’ over my RoadID. Hopefully they won’t be needed, but for a very modest cost, the ICEDot system gives great peace of mind.
My ‘A’ race for 2015 is the Transcontinental which will be a 4,153 km bicycle race starting 24 July with 38,326 m of climbing (assuming I don’t get lost!). This year we start at Geraardsbergen Belgium—just west of Brussels, with check points at the top of Mt. Ventoux in France, the Strada Del Assetia west of Turin, Vukovar Croatia, Mt. Locven in Montenegro, before finishing at the Rumeli in Istanbul. The route below is my ‘optimal’ route, which is pretty well finalized except the last section after Montenegro. May go down through Albania and Greece like last year. Will just see how it goes.